Lake City Webs In-Building Cellular Amplifiers Page


		In-Building Cellular Amplifiers

In-Building Amplifiers / Boosters Keep You Connected at Home and at Work

Direct Connection Amplifier System

Connects Directly into Your Phone With an Adapter

Puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter and gives you maximum signal performance for rural or remote locations.

• Requires a physical cable connection to your phone or cellular data card
• No signal loss because of the direct connection
• Best performance in rural or remote locations
• Can be used in buildings
• Adapters available for most phone and cellular data card models
• Must have an external antenna

Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable to connect the antenna to the amplifier.

In-Building Wireless Amplifier Systems

Requires No Physical Connection to Your Phone – It’s Wireless

Transmits and receives an improved wireless signal inside your home or building and requires no physical connection to your phone.

• Requires NO Physical Cable Connection to Your Phone or Cellular Data Card
• The System Can Be Used By Multiple Phones and Cellular Data Cards
• Works With All Cell Phone and Cellular Data Card Models
• A Little More Expensive Than a Direct Connection Amplifier
• Inside Signal Range May Vary With Signal Strength
• Must Have an Outside Antenna and an Inside Antenna

Each In-Building Wireless Amplifier System contains an amplifier and a power supply that plugs into a standard 120-volt wall outlet. You will also need at least one inside and one outside antenna and at least two lengths of coaxial cable to connect each antenna to the amplifier.

Please Contact Us for a FREE evaluation and time estimate.